System Analisa Reparasi Ponsel

Program System Analisa Reparasi Ponsel Hardware Serta Software

Archive for June, 2008

NOKIA E70 Secret Codes

Posted by System Analisa on June 14, 2008

To check the IMEI(International Mobile Equipment identity)
*#06#

To check the firmware version and date use
*#0000#

To check the Bluetooth MAC use
*#bta0#

To check the WLAN MAC address
*#mac0wlan#

To clear the operator logo
*#opr0logo#

To activate
*#pca0#

to deactivate
*#pcd0# the GPRS PCCCH support

To check the SIM clock status
*#sim0clock#.

To check the software version
*#170602112302#.

To check the Warranty codes
*#war0anty#.

#pw+1234567890+n#
Display the SIM lock status:

n = 1: provider lock.
n = 2: network lock.
n = 3: country lock.
n = 4: SIM lock.

Posted in download, NOKIA E70 Secret Codes | Tagged: | Leave a Comment »

NOKIA 9500 Secret Codes

Posted by System Analisa on June 14, 2008

To check IMEI press
*#06#.

To check the Software Version press
*#170602112302#.

If Imagine the cell battery is very low, and an important call is expected what to do there is a a reserve battery in the absence of the charger then to activate the key and recharge the cell again is to press “*3370#”.

#3370#
To deactivate Enhanced Full Rate Codec( EFR).

*#4720#
To activate Half Rate Codec.

*#0000#
It displays the software version of the phone.

*#9999#
To check the phones software version if *#0000# does not work.

#pw+1234567890+1#
To check the Provider Lock Status. ( “*” sigh to obtain the “p,w” and “+” symbols).

#pw+1234567890+2#
To check the Network Lock Status. ( “*” sigh to obtain the “p,w” and “+” symbols).

#pw+1234567890+3#
To check the Country Lock Status. ( “*” sigh to obtain the “p,w” and “+” symbols).

#pw+1234567890+4#
To check the SIM Card Lock Status.( “*” sigh to obtain the “p,w” and “+” symbols).

*#147#
vodafone this lets you know who called you last time *#1471#.

*#21#
Allows you to check the number that “All Calls” are diverted.

*#2640#
It displays the security code.

#30#
It lets you see the private number.

*#67705646#
It removes operator logo on 3310 & 3330.

*#73#
It reset the phone timers.

*#746025625#
It displays the SIM Clock status.

*#7760#
Manufactures code.

*#7780#
Restore factory settings.

*#92702689#
(to rember *#WAR0ANTY#)

Posted in download, NOKIA 9500 Secret Codes | Tagged: | Leave a Comment »

Universal Secret Codes Sony Ericsson

Posted by System Analisa on June 14, 2008


Getting your IMEI (International Mobile Equipment Identity):
Number: *#06#

Access Software version:
> * < < * < *

Reach last dialed numbers:
0 then #

The Sony Ericsson Secret Menu screen:
-> * <- <- * <- *

Change to Default Language (English):

Info about SIMLOCK:
< * * <

Opening phone without a SIM card:
**04*0000*0000*0000# followed by on ‘Wrong Pin’ number

Posted in Codes Sony Ericsson, download, Universal Secret | Tagged: | Leave a Comment »

NOKIA N93 Secret Codes

Posted by System Analisa on June 14, 2008

*#06#
to check the IMEI.

*#0000#
To check the firmware version and date.

*#92702689# *#war0anty#
To check the IMEI. The date when it was purchased, and the date when it was repaired.

*4720# (*hra0#)
To activates the Half Rate.

#4720# (#hra0#)
To deactivates Half Rate.

*#3370# (*efr0#)
To activates Enhanced Full Rate.

*#746085685# (*#sim0clock#)
To check the SIM clock status.

*#7220# (*#pca0#)
To activate the GPRS and Packet Common Control Channel(PCCCH) supports.

*#7230# (*#pcd0#)
To deactivate the GPRS and Packet common control channel (PCCCH)supports.

*#7760# (*#ssn0#)
To check the manufacturing serial number.

*#2820# (*#bta0#)
To check the Bluetooth MAC address (Phone must have a built in bluetooth adapter).

*#7370925538# (*#res0wallet#)
Reset the mobile wallet.

Posted in download, NOKIA N93 Security Codes | Tagged: | Leave a Comment »

Secret Codes Universal NOKIA

Posted by System Analisa on June 14, 2008

*3370#
Activate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced my approx. 5%

#3370#
Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )

*#4720#
Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

*#4720#
Deactivate Half Rate Codec.

*#0000#
Displays your phones software version,
1st Line : Software Version,
2nd Line : Software Release Date,
3rd Line : Compression Type. ( Favourite )

*#9999#
Phones software version if *#0000# does not work.

*#06#
For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )

#pw+1234567890+1#
Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

#pw+1234567890+2#
Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

#pw+1234567890+3#
Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

#pw+1234567890+4#
SIM Card Lock Status. (use the “*” button to obtain the “p,w”and “+” symbols).

*#147#
(vodafone) this lets you know who called you last.

*#1471#
Last call (Only vodofone).

*#21#
Allows you to check the number that “All Calls” are diverted to

*#2640#
Displays security code in use.

*#30#
Lets you see the private number.

*#43#
Allows you to check the “Call Waiting” status of your phone.

*#61#
Allows you to check the number that “On No Reply” calls are diverted to.

*#62#
Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.

*#67#
Allows you to check the number that “On Busy Calls” are diverted to.

*#67705646#
Removes operator logo on 3310 & 3330
.
*#73#
Reset phone timers and game scores.

*#746025625#
Displays the SIM Clock status, if your phone supports this power saving feature”SIM Clock Stop Allowed”, it means you will get the best standby time possible.

*#7760#
Manufactures code.

*#7780#
Restore factory settings.

*#8110#
Software version for the nokia 8110.

*#92702689#
Displays –
1.Serial Number,
2.Date Made,
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode you need to switch your phone off then on again. ( Favourite )

*#94870345123456789#
Deactivate the PWM-Mem.

**21*number#
Turn on “All Calls” diverting to the phone number entered.

**61*number#
Turn on “No Reply” diverting to the phone number entered.

**67*number#
Turn on “On Busy” diverting to the phone number entered.

12345
This is the default security code. press and hold # Lets you switch between lines

Posted in download, Secret Codes, Universal NOKIA | Tagged: | Leave a Comment »

NOKIA N95 Secret Codes

Posted by System Analisa on June 14, 2008

*#06#
IMEI number (International Mobile Equipment Identity)

*#0000#
Firmware version and date, Phone Model and Operator Variant

*#92702689#
Life timer (W A R 0 A N T Y) – The amount of time your phone has spent sending and receiving calls.

*#62209526#
Wireless MAC Address (M A C _ W L A N)

*#2820#
Bluetooth MAC address (B T A 0?)

*#7370#
Format phone (R E S 0 ?)

*#7780#
Factory Reset (R S T 0 ?)

Note:
Format phone restores phone to as if it was out of the box. Retains firmware version and operator Variant changes but wipes all applications you have installed. Does not format the memory card so any apps on there may reinstall once powered back up again.

Another way to format some symbian phones: Power off phone. Press and hold Green, * and 3 and keep them held whilst powering on and for a few seconds after.

Factory Reset resets all settings to defaults but keeps any applications you have installed and photos etc. Both need the Security code, which, by default, is 12345.

N95 picture viewer:
2 – Scroll up (when zoomed)
4 – Scroll left (when zoomed)
5 – Zoom in (12.5%/25%/50%)
6 – Scroll right (when zoomed)
8 – Scroll down (when zoomed)
0 – Zoom out

Press and hold (in Standby):
Right selection key: Voice commands
Multimedia Key: Now Playing
1: Voicemail
2-9: shortcuts to address book you need to set up first
0: Web
#: Switches between General and Silent modes – not supported by all Operator Variants (when composing messages will switch between character and number input when held down)

12# (etc) in standby will dial the number held in location 12 on your SIM address book.

Posted in download, NOKIA N95 Secret Codes | Tagged: | Leave a Comment »

Nokia E65 Secret Codes

Posted by System Analisa on June 14, 2008

*#06#
To check the IMEI.
*#0000#
To check the firmware version and date.
*#92702689# *#war0anty#
To check the IMEI. The date when it was purchased, and the date when it was repaired.
*4720# (*hra0#)
To activates the Half Rate.
#4720# (#hra0#)
To deactivates Half Rate.
*3370# (*efr0#)
To activates Enhanced Full Rate.
#3370# (#efr0#)
To deactivates Enhanced Full Rate.
*#746085685# (*#sim0clock#)
To check the SIM clock status.
*#7220# (*#pca0#)
To activate the GPRS and Packet Common Control Channel(PCCCH) supports.
*#7230# (*#pcd0#)
To deactivate the GPRS and Packet common control channel (PCCCH)supports.
*#7760# (*#ssn0#)
To check the manufacturing serial number.
*#2820# (*#bta0#)
To check the Bluetooth MAC address.
*#7370925538# (*#res0wallet#)
Reset the mobile wallet

Posted in download | Tagged: | Leave a Comment »

Other CDMA CODE Programming

Posted by System Analisa on June 9, 2008

Fly Bird Service Codes

Fly Bird S288, S688
#*301#02# send – with SIM menu: 7 – 10 – ok,
#*8000#, #*3676# (reboot repair)

V09, S1180
*, 3 times down, 3 times up – Service Menu

Mitsubishi Codes

hold * 476989 NS Lock Menu
hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level
hold * 3926 Shut Down…

*#0048# fast change polish langpack
*0000# automatic language

*850696 Warmstart

Eclipse:

hold * 65512890 eeprom reset – cure for hangs ect.

Nec Service Codes

*#06# IMEI
*73738# (send?) Reset to defaults
*#2820# Software version

SP Lock info:

*#3210# (send?) For Sim lock info
*#8140# (send?) For Net lock info

[password is an 8 digits number]

Sim Lock *#4960# (send?) – Inquiry * 4969 * password * password # (send?)

Net Lock *#7320# (send?) – Inquiry * 7320 * password * password # (send?)

Net Lock 2 *#2220# (send?) – Inquiry * 2220 * password * password # (send?)

Subnet Lock *#1110# (send?) – Inquiry * 1110 * password * password # (send?)

VK Mobile Service Codes

*#06# IMEI checking code
*#79# S/W Version checking code
0124 Master Code
*#85*364# (*) Engineering mode Access code (Press last button for 3 secs)
85558555#(*)-hold

VG107
855855# without SIM

VG207
4268#(*)-hold

Trium Service Codes

*#06# IMEI
hold * 4329 Net Monitor1
hold * 621342 Net Monitor2
hold * 5472 M4 Testmode
hold * 5806 SW version
hold * 5807 HW version
hold * 936505 SW and HW version
hold * 476989 NS Lock Menu
hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level
hold * 3926 Shut Down…
*#0048# Fast change polish langpack
*0000# Automatic language
*850696 Warmstart

Eclipse:
hold * 65512890 eeprom reset – cure for hangs ect.

Dancall Service Codes

*#06# IMEI
*#9999# Firmware
*#9998# Configuration
*#9997# Selftest
*#9994# Serial number (DANCALL HP 2731)
*#9993# Adding “Engineering functions”
*#9990# Battery monitor
*#9000# SIM Lock
*#9001# Group SIM Lock
*#9002# Operator SIM Lock
*#9003# Network SIM Lock
M1599955 Time to discharge

Switch

90E05 – Ericsson T28
90E06 – Ericsson T20
90E07 – Ericsson T20 / T28 / R320, Nokia 8210 / 6210
90E08 – Ericsson T28, Nokia 8210
EF 9XG – Ericsson T28
0512(0518, 0519) – Ericsson T68
0518B – Siemens C35 / A35, Nokia 3310
0503 – Siemens C35, Ericsson T10 / A2618 / A1018, Nokia 3310
0506 – Nokia 3310
0507A – Nokia 3310, Ericsson A2618
SP Z BB101 – Nokia 3510i
mld 2N2 (blue) – Working with Nokia 6210 / 8210 / 6310i
KCD 282 – Nokia 6310
XP215 – Siemens C45
DFY21R74 – Nokia 5110 / 6110
N50 02A – Samsung T100
L50 08C – Samsung R210
90D – Samsung 2100
0501B – Alcatel BE4
0511A – Sony CD5

Maxon Service Codes

*#9922# – Menu, reset (without SIM)
*#9900# – Software Version
*#9901# – Software Version (PBatch)
*#9911# – L1 Debug on/off
*#9915# – Back to defauld
*#9916# – Text (scroll up/down)
*#9917# – Lock status
*#9934# – Bd config
*#9935# – FC init
*#9936# – TOC init
*#9937# – Discharging battery
*#9940# – Pins
*#9941# – Testsignal
*#9953# – Phone off
*#9957# – Select 2-3 Menu lines
*#9958# – Watch stop
*#9959# – Watch start
*#9960# – Contrast set
*#9962# – SMS Menu
*#9988# – Tetris Play
*#9999# – Oem Id
Wahana Ponsel (Wahana Dunia Telekomunikasi Indonesia)
Website Tempat Belajar Perbaikan Ponsel
Baik Hardware maupun Software Secara Gratis
http://www.wahanaponsel.com .:. http://www.wahanaponsel.net
http://www.rajaponsel.com .:. http://www.rajaponsel.net

Posted in download | Tagged: | Leave a Comment »

Synertek, Toshiba GSM Unlock Code

Posted by System Analisa on June 9, 2008

Toshiba 2032P:
1. Slide the Radio Standby Switch on the left side of the device to the upper side (ON)
to activate the phone function.
This is the switch with the phone icon over it

2. After power up is completed use the stylus to tap on the ADMIN pull up menu at the
bottom of the screen and select ACTIVATION WIZARD.
If your device has not yet been activated the ACTIVATION WIZARD will
automatically start when you turn on the radio in your device.

3. Tap NEXT 3 times.
If the device has been previously activated it will require only 2 presses.
4. On the fourth screen enter the 6 digit OTKSL using keyboard
5. Enter the MIN in both entery fields then tap NEXT
6. Wait for the device to initialize and display “ready to connect”
7. To initiate IOTA tap the word ADMIN at the bottom of the display
and then Data Provisioning
8. Programming is complete

Synertek:
Code for NAM Programming Mode : Synertek S-200
NAM Set : [MENU] [0] [SPC CODE]
Test Vibro/Rx/Tx/ [#] [#] [5] [5] [5] [5] [SAVE]
Debug Screen: [#] [#] [3] [3] [SAVE]
Debug Screen: [#] [#] [5] [2] [3] [SAVE]
Unknou Code !!!: [#] [#] [3] [2] [5] [SAVE]
Rf Test: [#] [# ][#] [#] [SAVE]

Curitel:
Code for NAM Programming Mode : Hyundai hx510b/h100/h150(Curitel)
NAM Set: [#] [#] [2] [0] [0] [2] [2] [0] [0] [2] [PWR] [1] [SPC CODE]
Field Teste :[#] [#] [2] [0] [0] [2] [2] [0] [0] [2] [PWR] [1] [MASTER CODE]
Enter A-KEY: [2] [5] [3] [9] [*] [*]
Debug Menu: [#] [#] [2] [7] [7] [3] [2] [7] [2] [6][PWR]
SAR Test: [#] [#] [2] [7] [7] [5] [2] [3] [4] [5] [PWR]
Baud rate: [#] [#] [3] [6] [*] [*] [PWR]
DM mode Enable: [*] [*] [1] [0] [0] [4] [PWR]
DS mode Enable: [*] [*] [1] [0] [0] [5] [PWR]
Test Bell/Led/Voice/Dot:[#] [#] [1] [1] [2] [2] [PWR]
RF mode: [#] [#] [2] [2] [4] [0] [PWR]
RAS RAM: [#] [#] [2] [7] [7] [4] [PWR]
CMUX 1: [*] [*] [0] [4] [8] [1] [PWR]
CMUX 2: [*] [*] [0] [4] [8] [2] [PWR]
RX mode FAX: [*] [*] [0] [4] [9] [2] [PWR]
RX mode DATA: [*] [*] [0] [4] [9] [1] [PWR]
RX mode RESET: [*] [*] [0] [4] [9] [0] [PWR]

*******
Wahana Ponsel (Wahana Dunia Telekomunikasi Indonesia)
Website Tempat Belajar Perbaikan Ponsel
Baik Hardware maupun Software Secara Gratis
http://www.wahanaponsel.com .:. http://www.wahanaponsel.net
http://www.rajaponsel.com .:. http://www.rajaponsel.net

Here is a list of various codes to try out. Some may require an
MSL to be able to make full use of the functionality.

##2769737 [##BROWSER] MiniBrowser Settings (2G)
##8626337 [##VOCODER] Set Vocoder
##3282 f0 [##DATA] Setup Menu for Vision handsets
##8463 [##TIME] Airtime Menu
##040793 Debug Menu
##786 [##RUN] Technical Information
be careful with this one, you can reset the handset)
##932 [##WEB] IP Address information (2G)
##889 [##TTY] TTY On or TTY Off
##4357 [##HELP] Help

Posted in download | Tagged: | Leave a Comment »

Sanyo GSM Unlock Code

Posted by System Analisa on June 9, 2008

Sanyo:
Sanyo 4000 4500 4700 5000 6000:
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed – press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete

Sanyo 5150 5300 and 6400:
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming ill be displayed.
Scroll and highlight Mobile Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete

Sanyo 6000:
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete

Sanyo 4900:
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK key.
8. Programming is complete

Sanyo 6200:
1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete

Posted in download | Tagged: | Leave a Comment »

Kyocera GSM Unlock Code

Posted by System Analisa on June 9, 2008

Kyosera:
Kyocera 2345 1135
1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming

Kyocera 6035:
1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.

Kyocera 3035:
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key
(Navigation key is the button located between the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the “clear” key
(arrow key located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation key
13. Press END. Programming is complete.

Kyocera 2255:
1. Press the 1 key six times (111111) “Option will be highlighted
2. Press OK
3. Scroll down to “Programming” and press “OK”
4. Enter OTKSL and press the navigation key
5. “Service Options” will appear scroll down to the “Basic NAM1 Info”
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.

Posted in download | Tagged: | Leave a Comment »